Camshafts

Replacing the camshaft on LADA is one of the easiest ways to change the characteristics of the LADA engine. The correct selection of the camshaft on the LADA can provide at least 10% increase in engine performance without losing its fuel efficiency and increasing the amount of harmful emissions into the atmosphere.

The LADA camshaft is a device designed to open and close the intake and exhaust valves in harmony with the movement of the pistons in the engine block. This is how the gas distribution process takes place. Like any other part, the LADA camshaft has parameters that characterize it. To understand what to expect from a particular camshaft, you need to understand the terminology a little. Enthusiasts of LADA tuning are familiar with such parameters of the camshaft as lift and phase.

The camshaft cam lift or valve stroke indicates how many millimeters the valve will rise from the seat. For example, for the LADA 2112 serial shaft, this value is 7.6 mm. Camshafts on LADA 2112 can have a stroke of up to 13 mm. In addition to the height of the valve lift above the seat, the hight of valve lift also affects the speed of opening the valve.

The second parameter is the phase. The phase of the LADA camshaft is measured in degrees of rotation of the crankshaft and describes the duration of opening the intake or exhaust valve. In simple terms, the phase shows the time that is open, for example, the intake valve on the intake stroke. The camshaft phase characterizes the operating range of the LADA engine. Serial camshafts LADA 2112 have a phase of 256 degrees. A camshaft with this characteristic allows you to get a stable idle speed and good traction at the lowest revs. For tuning, camshafts with a phase of 270-320 degrees are used. So, the same LADA 2112 engine will have the following values of the effective range when using LADA camshafts:

270 degrees 1500-7000 rpm;

280 degrees 2500-8000 rpm;

290 degrees 3500-9000 rpm;

300 degrees 4500-10000 rpm.

Our website presents a wide line of camshafts. This variety enables you to choose a set to achieve the desired characteristics of the LADA engine.

When installing non-serial camshafts it is necessary to use adjustable camshaft gear which is also called an adjustable sprocket. Their use is necessary for the correct orientation of the LADA camshaft in the engine.

Installation of non-serial camshafts also requires certain equipment and knowledge, so LADA Moscow recommends that you trust this work to professionals.

Attention! Camshafts for LADA 2112 engines and their modifications may require modification of the cylinder head housing.

"Trophy-G" 252/262 10.40/10.30 Camshaft LADA 2101-2107 2121-2131 NIVA 4x4 Urban

Valve lift 10.40 mm / 10.30 mm, phase width 252 ° / 262 °.The shaft is designed for mechanical pushe..

208.99€

"i-Trophy" 252/262 10.45/9.60 Camshaft LADA 2101-2107 RIVA 2121-2131 NIVA 4x4

Valve lift - 10.45 mm / 9.60 mmThe phase width is 252 °.The shaft is designed for mechanical pushers..

208.99€

"286/266" Drift+ Camshaft LADA 2101-2107 RIVA NOVA LAIKA

Inlet (11.8):Phase 286when the valve is opened by 1 mm, the phase is 236 degreeswhen the valve is op..

192.99€

"258" Drift Camshaft LADA 2101-2107 RIVA NOVA LAIKA

With a gap between the rocker and the valve 0.3mm17-52 deg.56-20 deg.with a gap between the rocker a..

173.99€

"Kobyla" Camshaft 10.6/9.8 LADA 21214 NIVA 4x4

Camshaft for the engine VAZ 21214. The valve lift at the inlet is 10.6 mm, at the outlet 9.8 mm. The..

153.99€

"Loshak" Camshaft 10.3/9.8 LADA 2101-2107 RIVA NOVA LAIKA

Camshaft for VAZ engines 2101, 2103, 2105, 2106, 21213. The valve lift at the inlet is 10.6 mm, at t..

153.99€

"Pulya" Camshaft 10.7mm 268 phase LADA 2108-2115 SAMARA Kalina Priora Granta

The best for rev range of 3000 to 5000+ rpm.Overlap in TDP - 1.9mm.Please state your engine model in..

171.99€

Individual Design Camshafts Manufacturing LADA

Please contact us for details.2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 ..

0.99€

"M55" Camshaft 84-62/63-87 * 12.0/12.2/5.2 LADA 2101-2121 21213 2131 NIVA 4x4

Phase: exhaust / intake * Valve lift: exhaust  / intake / OverlapBase diameter 28-28.8Can be manufac..

248.99€

"M45" Camshaft 89-56/58-92 * 12.4/12.6/4.5 LADA 2101-2121 21213 2131 NIVA 4x4

Phase: exhaust / intake * Valve lift: exhaust  / intake / OverlapBase diameter 28-28.4Can be manufac..

245.99€

"M35" Camshaft 79-55/56-83 * 12.2/12.4/4.5 LADA 2101-2121 21213 2131 NIVA 4x4

Phase: exhaust / intake * Valve lift: exhaust  / intake / OverlapBase diameter 28-28.6Can be manufac..

241.99€

"M25" Camshaft 78-48/48-82 * 12.0/12.2/3.4 LADA 2101-2121 21213 2131 NIVA 4x4

Phase: exhaust / intake * Valve lift: exhaust  / intake / OverlapBase diameter 28-28.8Can be manufac..

237.99€

"M15" Camshaft 78-38/39-82 * 11.8/12.0/2.3 LADA 2101-2121 21213 2131 NIVA 4x4

Phase: exhaust / intake * Valve lift: exhaust  / intake / OverlapBase diameter 28-29.0Can be manufac..

237.99€

"M48" Camshaft 86-54/56-94 * 11.5/11.5/4.2 LADA 2101-2121 21213 2131 NIVA 4x4

Phase: exhaust / intake * Valve lift: exhaust  / intake / OverlapBase diameter 28-29.6Can be manufac..

245.99€

"M38" Camshaft 84-46/48-92 * 11.5/11.5/3.3 LADA 2101-2121 21213 2131 NIVA 4x4

Phase: exhaust / intake * Valve lift: exhaust  / intake / OverlapBase diameter 28-29.6Can be manufac..

241.99€

"M28" Camshaft 82-38/40-90 * 11.5/11.5/2.3 LADA 2101-2121 21213 2131 NIVA 4x4

Phase: exhaust / intake * Valve lift: exhaust  / intake / OverlapBase diameter 28-29.6Can be manufac..

237.99€

"780" Camshaft 79-31/33-85 * 11.6/11.6/1.6 LADA 2101-2121 21213 2131 NIVA 4x4

Wide phase camshaft for 2000cc engines with working range up to 8000rpm.Phase: exhaust / intake * Va..

234.99€

"680" Camshaft 71-29/31-77 * 11.6/11.6/1.4 LADA 2101-2121 21213 2131 NIVA 4x4

Wide phase camshaft for 1700cc engines with working range up to 7500rpm.Phase: exhaust / intake * Va..

234.99€

"580" Camshaft 70-33/34-76 * 11.2/11.2/1.7 LADA 2101-2121 21213 2131 NIVA 4x4

Wide phase camshaft for 1700cc engines with working range up to 7500rpm.Phase: exhaust / intake * Va..

230.99€

"94" Camshaft 70-33/34-76 * 12.2/12.4/1.7 LADA 2101-2121 21213 2131 NIVA 4x4

For engines from 1700 to 2000cc with working range up to 6500rpm.Phase: exhaust / intake * Valve lif..

230.99€

Showing 1 to 20 of 49 (3 Pages)